Ultranitril 358

Designed with an embedded optimal grip to safely handle tasks in dry & greasy environments

Chemical Protection

Gallery

Specific advantages

Added comfort and thermal insulation, due to the cotton-knit lining
Very supple glove providing high dexterity
Good fingertips sensitivity
Optimal grip to improve productivity, reduce hand fatigue and enhance safety
Silicone free to prevent traces, defects on metal sheet and glass prior to painting

Care for the environment

Plastic packaging optimized
Recycled material in the packaging: 30 %

Applications

Automotive/mechanical industry

Automotive assembly

Chemical industry

Chemical product blending
Handling drums of chemical products

Petrochemical industry

Cosmetics and Pharmaceutical industry

Handling in laboratories

Agriculture sector

Spray mixtures preparation
Pesticides handling
Tank filling
Application & spreading of pesticides
Pesticides waste management
Treatment equipment cleaning

Standards

3111A
Type A AJKOPT
X1XXXX
ISO 13997:
4.9N (499g)

Product detail

Material	Nitrile
Colour	Green
Interior finish	Textile support Mapa Technology
Exterior finish	Reinforced grip
Length (cm)	36
Thickness (mm)	1,1
Size	6 7 8 9 10 11
Packaging	12 pairs/bag 72 pairs/carton

Chemical chart

OVERALL CHEMICAL PROTECTION RATING

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of the colours :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.

Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.

Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.

Not recommended, these gloves are deemed unsuitable for work with this chemical.

NT: Not tested

NA: "Not applicable" because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical Product	CAS #	Breakthrough time (minutes)	Permeation level	Standard	Degradation level	Rating
1,1,1-Trichloroethane 99%	71-55-6	NT	NT		1	NA
1,1,2-Trichlorotrifluoroethane (Freon TF or Freon 113) 99%	76-13-1	480	6	ASTM F739	4	++
1,2 - dichloroethane 99%	107-06-2	3	0	ASTM F739	NT	NA
2-Butoxyethanol (Butyl Cellusolve) 99%	111-76-2	NT	NT		4	NA
2-Ethoxyethyl acetate (Cellosolve Acetate) 99%	111-15-9	NT	NT		2	NA
2-Propanol (Isopropanol) 99%	67-63-0	480	6	ASTM F739	4	++
Acetaldehyde 99%	75-07-0	3	0	ASTM F739	NT	NA
Acetic acid 60%	64-19-7	480	6	EN 16523-1:2015	NT	NA
Acetic acid 99%	64-19-7	54	2	EN 16523-1:2015	2	=
Acetone 99%	67-64-1	3	0	ASTM F739	1	-
Acetyl Chloride 98%	75-36-5	1	0	ASTM F739	NT	NA
Acrylic acid 25%	79-10-7	478	5	EN 16523-1:2015	NT	NA
Ammonium hydroxide solution 25%	1336-21-6	246	5	EN 16523-1:2015	4	++
Ammonium hydroxide solution 29%	1336-21-6	NT	NT		4	NA
Aniline 99%	62-53-3	NT	NT		1	NA
Benzene 99%	71-43-2	6	0	ASTM F739	2	-
Bromobenzene 99%	108-86-1	8	0	EN 16523-1:2015	NT	NA
Butyl Acetate 99%	123-86-4	20	1	EN 16523-1:2015	2	=
Carbon disulfide 99%	75-15-0	4	0	ASTM F739	NT	NA
Carbon Tetrachloride 99%	56-23-5	194	4	EN 16523-1:2015	4	++
Chromic Acid 50%	7738-94-5	NT	NT		4	NA
Cumene 98%	98-82-8	NT	NT		3	NA
Cyclohexane 99%	110-82-7	480	6	ASTM F739	4	++
Dichloromethane (Methylene Chloride) 99%	75-09-2	1	0	ASTM F739	NT	NA
Diethanolamine 97%	111-42-2	480	6	ASTM F739	4	++
Dimethylformamide 100%	68-12-2	6	0	EN 16523-1:2015	NT	NA
Dimethylformamide 99%	68-12-2	NT	NT		1	NA
Dimethylsulfoxide 99%	67-68-5	79	3	EN 16523-1:2015	3	++
Ethanol 95%	64-17-5	212	4	EN 16523-1:2015	4	++
Ether (Diethyl Ether) 99%	60-29-7	NT	NT		4	NA
Ethyl acetate 99%	141-78-6	5	0	EN 16523-1:2015	1	-
Ethyl benzene 99%	100-41-4	11	1	EN 16523-1:2015	2	=
Ethylene glycol 99%	107-21-1	480	6	ASTM F739	4	++
Formaldehyde 37%	50-00-0	480	6	ASTM F739	4	++
Formic Acid 96%	64-18-6	29	1	EN 16523-1:2015	NT	NA
Fuel oils mixture	68476-34-6	480	6	EN 16523-1:2015	3	++
Furfural 99%	98-01-1	NT	NT		1	NA
Hexamethylene Diisocyanate (1,6 - Diisocyanatohexane) 99,9%	822-06-0	NT	NT		2	NA
Hydrazine 35%	302-01-2	480	6	ASTM F739	4	++
Hydrazine 70%	302-01-2	480	6	ASTM F739	4	++
Hydrochloric acid 10%	7647-01-0	480	6	ASTM F739	4	++
Hydrochloric acid 35%	7647-01-0	NT	NT		4	NA
Hydrochloric acid 37%	7647-01-0	480	6	ASTM F739	4	++
Hydrogen peroxide 30%	7722-84-1	480	6	EN 16523-1:2015	4	++
Isobutyl alcohol 99%	78-83-1	480	6	ASTM F739	4	++
Kerosene mixture	8008-20-6	480	6	ASTM F739	4	++
m-Cresol 97%	108-39-4	NT	NT		1	NA
Methanol 85%	67-56-1	NT	NT		4	NA
Methanol 99%	67-56-1	37	2	EN 16523-1:2015	4	+
Methyl Ethyl Ketone (2-Butanone) 99%	78-93-3	3	0	ASTM F739	1	-
Methylisobutylketone 99%	108-10-1	NT	NT		2	NA
n-Heptane 99%	142-82-5	480	6	ASTM F739	4	++
n-hexane 95%	110-54-3	480	6	ASTM F739	4	++
N-N dimethyl acetamide 99%	127-19-5	NT	NT		2	NA
Naphtha mixture	8030-30-6	480	6	ASTM F739	4	++
Naphtha VM&P mixture	8032-32-4	480	6	ASTM F739	4	++
Naphtha, Hydrotreated Heavy mixture	64742-48-9	480	6	EN 16523-1:2015	4	++
Nitric acid 50%	7697-37-2	NT	NT		4	NA
Nitric acid 65%	7697-37-2	50	2	EN 16523-1:2015	3	+
Nitrobenzene 99%	98-95-3	NT	NT		1	NA
Phenol 85%	108-95-2	49	2	EN 16523-1:2015	3	+
Phosphoric acid 75%	7664-38-2	480	6	ASTM F739	4	++
Phosphoric acid 85%	7664-38-2	480	6	ASTM F739	4	++
Phosphorous Trichloride 98%	7719-12-2	NT	NT		1	NA
Potassium Fluoride 40%	7789-23-3	480	6	ASTM F739	4	++
Potassium Hydroxide 50%	1310-58-3	480	6	ASTM F739	4	++
Propylene Oxide 99%	75-56-9	2	0	ASTM F739	NT	NA
Sodium hydroxide 20%	1310-73-2	480	6	ASTM F739	4	++
Sodium hydroxide 40%	1310-73-2	480	6	ASTM F739	4	++
Sodium hydroxide 50%	1310-73-2	480	6	ASTM F739	4	++
Spent Acid mixture	NA	480	6	ASTM F739	NT	NA
Styrene 99%	100-42-5	7	0	ASTM F739	1	-
Sulfuric acid 10%	7664-93-9	480	6	ASTM F739	4	++
Sulfuric acid 40%	7664-93-9	480	6	ASTM F739	4	++
Sulfuric acid 50%	7664-93-9	480	6	ASTM F739	4	++
Sulfuric acid 96%	7664-93-9	84	3	EN 16523-1:2015	1	-
t-Butyl Methyl Ether 98%	1634-04-4	NT	NT		4	NA
tert-Butyl Hydroperoxide 70%	75-91-2	NT	NT		4	NA
Tetrachloroethylene (Perchloroethylene) 99%	127-18-4	72	3	EN 16523-1:2015	3	++
Toluene 99%	108-88-3	8	0	EN 16523-1:2015	2	-
Trichloroethylene 99%	79-01-6	4	0	EN 16523-1:2015	1	-
Triethanolamine 98%	102-71-6	480	6	ASTM F739	4	++
Triethanolamine 99,4%	102-71-6	NT	NT		4	NA
Turpentine mixture	8006-64-2	480	6	ASTM F739	4	++
Unleaded gasoline 100%	8006-61-9	214	4	EN 16523-1:2015	NT	NA
Unleaded gasoline mixture	8006-61-9	NT	NT		4	NA
Xylene 99%	1330-20-7	NT	NT		2	NA

*not normalized result

More gloves