StanSolv A14
Unique Z-pattern grip provide secure handling of hard-to-grasp items
Chemical ProtectionGallery
Specific advantages
- Longer service life: excellent mechanical resistance (abrasion, perforation)
- Excellent protection during intensive handling of high-risk chemical products
- Silicone free to prevent traces, defects on metal sheet and glass prior to painting
Applications
Automotive/mechanical industry
- Treating/degreasing metals with aggressive solvents
Mechanical industry
- Etching / degreasing
Chemical industry
- Handling drums of chemical products
Other industries
- Application of pesticides
- Cleaning of printing-press rollers
- Maintenance
- Timber treatment and finishing
Standards
-
4102
- AJKL
-
Product detail
| Material | Nitrile |
|---|---|
| Colour | Green |
| Interior finish | Chlorinated |
| Exterior finish | Embossed texture |
| Length (cm) | 36 |
| Thickness (mm) | 0.55 |
| Size | 8 9 10 11 |
| Packaging | 12 pairs/box 48 pairs/carton |
Chemical chart
OVERALL CHEMICAL PROTECTION RATING
Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.
Meaning of the colours :
Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT: Not tested
NA: "Not applicable" because not fully tested (only degradation OR permeation results)
The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time
| Chemical Product | CAS # | Breakthrough time (minutes) |
Permeation level |
Standard | Degradation level |
Rating |
|---|---|---|---|---|---|---|
| 1,1,1-Trichloroethane 99% | 71-55-6 | 276 | 5 | ASTM F739 | 1 |
|
| 1,1,2-Trichlorotrifluoroethane (Freon TF or Freon 113) 99% | 76-13-1 | 480 | 6 | ASTM F739 | 4 |
|
| 1,1,2,2-Tetrachloroethane 98% | 79-34-5 | 59 | 2 | ASTM F739 | 1 |
|
| 1,2 - dichloroethane 99% | 107-06-2 | 18 | 1 | ASTM F739 | 1 |
|
| 1,3 - Dichlorobenzene 98% | 541-73-1 | 73 | 3 | ASTM F739 | 1 |
|
| 2-Butoxyethanol (Butyl Cellusolve) 99% | 111-76-2 | 480 | 6 | ASTM F739 | 4 |
|
| 2-Ethoxyethanol (Cellosolve) 99% | 110-80-5 | 416 | 5 | ASTM F739 | 4 |
|
| 2-Ethoxyethyl acetate (Cellosolve Acetate) 99% | 111-15-9 | 162 | 4 | ASTM F739 | 3 |
|
| 2-Propanol (Isopropanol) 99% | 67-63-0 | 480 | 6 | ASTM F739 | 4 |
|
| 2,2,2-Trifluoroethanol 99% | 75-89-8 | 43 | 2 | ASTM F739 | 1 |
|
| Acetic acid 10% | 64-19-7 | 480 | 6 | ASTM F739 | 4 |
|
| Acetic acid 50% | 64-19-7 | 480 | 6 | ASTM F739 | 4 |
|
| Acetic acid 99% | 64-19-7 | 118 | 3 | ASTM F739 | NT |
|
| Acetone 99% | 67-64-1 | NT | NT | 1 |
|
|
| Acrylonitrile 99% | 107-13-1 | 12 | 1 | ASTM F739 | 1 |
|
| Ammonium hydroxide solution 29% | 1336-21-6 | 480 | 6 | ASTM F739 | 4 |
|
| Aniline 99% | 62-53-3 | 72 | 3 | ASTM F739 | 1 |
|
| Benzene 99% | 71-43-2 | 27 | 1 | ASTM F739 | 1 |
|
| Butyl Acetate 99% | 123-86-4 | 164 | 4 | ASTM F739 | 2 |
|
| Carbon disulfide 99% | 75-15-0 | 20 | 1 | ASTM F739 | 2 |
|
| Carbon Tetrachloride 99% | 56-23-5 | 341 | 5 | ASTM F739 | 3 |
|
| Chlorobenzene 99% | 108-90-7 | 42 | 2 | ASTM F739 | NT |
|
| Chromic Acid 50% | 7738-94-5 | 175 | 4 | ASTM F739 | 4 |
|
| Cumene 98% | 98-82-8 | 271 | 5 | ASTM F739 | 3 |
|
| Cyclohexane 99% | 110-82-7 | 480 | 6 | ASTM F739 | 4 |
|
| Diethanolamine 97% | 111-42-2 | 480 | 6 | ASTM F739 | 4 |
|
| Dimethylformamide 99% | 68-12-2 | 35 | 2 | ASTM F739 | NT |
|
| Dimethylsulfoxide 99% | 67-68-5 | 480 | 6 | ASTM F739 | 3 |
|
| Epichlorohydrin 99% | 106-89-8 | 4 | 0 | ASTM F739 | NT |
|
| Ethanol 95% | 64-17-5 | 480 | 6 | ASTM F739 | 4 |
|
| Ether (Diethyl Ether) 99% | 60-29-7 | 64 | 3 | ASTM F739 | 4 |
|
| Ethylene glycol 99% | 107-21-1 | 480 | 6 | ASTM F739 | 4 |
|
| Ethylene oxide 100% | 75-21-8 | 32 | 2 | ASTM F739 | NT |
|
| Formaldehyde 37% | 50-00-0 | 480 | 6 | ASTM F739 | 4 |
|
| Freon 12 99% | 75-71-8 | 480 | 6 | ASTM F739 | NT |
|
| Fuel oils mixture | 68476-34-6 | 480 | 6 | ASTM F739 | NT |
|
| Furfural 99% | 98-01-1 | 61 | 3 | ASTM F739 | NT |
|
| Hydrazine 35% | 302-01-2 | 480 | 6 | ASTM F739 | 4 |
|
| Hydrazine 70% | 302-01-2 | 480 | 6 | ASTM F739 | 4 |
|
| Hydrochloric acid 10% | 7647-01-0 | 480 | 6 | ASTM F739 | 4 |
|
| Hydrochloric acid 35% | 7647-01-0 | 480 | 6 | EN 374-3:2003 | 4 |
|
| Hydrochloric acid 37% | 7647-01-0 | 480 | 6 | ASTM F739 | 4 |
|
| Hydrochloric acid 50% | 7647-01-0 | NT | NT | 4 |
|
|
| Hydrofluoric Acid 10% | 7664-39-3 | NT | NT | 4 |
|
|
| Hydrofluoric Acid 49% | 7664-39-3 | 134 | 4 | ASTM F739 | 4 |
|
| Isobutyl alcohol 99% | 78-83-1 | 480 | 6 | ASTM F739 | 4 |
|
| Kerosene mixture | 8008-20-6 | 480 | 6 | ASTM F739 | 4 |
|
| m-Cresol 97% | 108-39-4 | 210 | 4 | ASTM F739 | 2 |
|
| Methanol 85% | 67-56-1 | NT | NT | 4 |
|
|
| Methanol 99% | 67-56-1 | 148 | 4 | ASTM F739 | 4 |
|
| Methylisobutylketone 99% | 108-10-1 | 57 | 2 | ASTM F739 | NT |
|
| n-Heptane 99% | 142-82-5 | 480 | 6 | ASTM F739 | 4 |
|
| n-hexane 95% | 110-54-3 | 480 | 6 | ASTM F739 | 4 |
|
| N-methyl-2-Pyrrolidone 99% | 872-50-4 | 108 | 3 | ASTM F739 | NT |
|
| N-N dimethyl acetamide 30% | 127-19-5 | 480 | 6 | ASTM F739 | NT |
|
| N-N dimethyl acetamide 99% | 127-19-5 | 39 | 2 | ASTM F739 | 1 |
|
| Naphtha mixture | 8030-30-6 | 480 | 6 | ASTM F739 | 4 |
|
| Naphtha (Stoddart Solvent) mixture | 8052-41-3 | 480 | 6 | ASTM F739 | 4 |
|
| Naphtha Heavy mixture | 68551-17-7 | NT | NT | 4 |
|
|
| Naphtha VM&P mixture | 8032-32-4 | 480 | 6 | ASTM F739 | 4 |
|
| Nitric acid 50% | 7697-37-2 | 341 | 5 | ASTM F739 | 3 |
|
| Nitric acid 70% | 7697-37-2 | 49 | 2 | ASTM F739 | NT |
|
| Nitrobenzene 99% | 98-95-3 | 45 | 2 | ASTM F739 | 1 |
|
| Oleic Acid 90% | 112-80-1 | NT | NT | 4 |
|
|
| Phenol 85% | 108-95-2 | 255 | 5 | ASTM F739 | 3 |
|
| Phosphoric acid 75% | 7664-38-2 | 480 | 6 | ASTM F739 | 4 |
|
| Phosphoric acid 85% | 7664-38-2 | 480 | 6 | ASTM F739 | 4 |
|
| Polychlorinated Biphenyl (PCB) (50%) in 1,2,4-Trichlorobenzene mixture | 11097-69-1 | 343 | 5 | ASTM F739 | NT |
|
| Potassium Hydroxide 50% | 1310-58-3 | 480 | 6 | ASTM F739 | 4 |
|
| Pyridine 99% | 110-86-1 | 26 | 1 | ASTM F739 | 1 |
|
| Sodium hydroxide 20% | 1310-73-2 | 480 | 6 | ASTM F739 | 4 |
|
| Sodium hydroxide 40% | 1310-73-2 | 480 | 6 | ASTM F739 | 4 |
|
| Sodium hydroxide 50% | 1310-73-2 | 480 | 6 | ASTM F739 | 4 |
|
| Sulfuric acid 10% | 7664-93-9 | 480 | 6 | ASTM F739 | 4 |
|
| Sulfuric acid 40% | 7664-93-9 | 480 | 6 | ASTM F739 | 4 |
|
| Sulfuric acid 50% | 7664-93-9 | 480 | 6 | ASTM F739 | 4 |
|
| Sulfuric acid 96% | 7664-93-9 | 138 | 4 | EN 374-3:2003 | NT |
|
| t-Butyl Methyl Ether 98% | 1634-04-4 | 480 | 6 | ASTM F739 | NT |
|
| Tert. Amyl Methyl Ether 96% | 994-05-8 | 480 | 6 | ASTM F739 | NT |
|
| Tetrachloroethylene (Perchloroethylene) 99% | 127-18-4 | 480 | 6 | ASTM F739 | 4 |
|
| Tetrahydrofurane 99% | 109-99-9 | 17 | 1 | ASTM F739 | 1 |
|
| Toluene 99% | 108-88-3 | 28 | 1 | ASTM F739 | 2 |
|
| Toluene Diisocyanate (TDI) 80% | 584-84-9 | 480 | 6 | ASTM F739 | 2 |
|
| Trichloroethylene 99% | 79-01-6 | 9 | 0 | ASTM F739 | 1 |
|
| Triethanolamine 98% | 102-71-6 | 480 | 6 | ASTM F739 | 4 |
|
| Turpentine mixture | 8006-64-2 | 480 | 6 | ASTM F739 | 4 |
|
| Unleaded gasoline mixture | 8006-61-9 | 480 | 6 | ASTM F739 | 4 |
|
| Vinyl acetate 99% | 108-05-4 | 30 | 1 | ASTM F739 | 2 |
|
| Xylene 99% | 1330-20-7 | 92 | 3 | ASTM F739 | 2 |
|
*not normalized result
