Temp-Tec NL517

A double-layer glove, with thermal insulation and extended length for extra arm protection.

Thermal Protection

Specific advantages

  • Excellent thermal insulation, due to double-knit cotton
  • Good grip when handling wet or slippery objects,
  • Multi-purpose chemical resistance (acids, aliphatic solvents) increased by the thickness of the material

Applications

Mechanical industry

  • Chemical treatment of metals
  • Oil quenching of steel

Food industry

  • Filleting Fish

Petrochemical industry

  • Sampling of hot petrochemical products

Other industries

  • Boiler room work
  • Handling of hot piping
  • Handling of moulds in the ceramic industry
  • Manufacture of adhesives
  • Manufacture of insulating electric wires
  • Road works in cold conditions
  • Steam cleaning

Rubber industry

  • Polymer extrusion

Standards

  • Mechanical hazards EN 388 2212
  • ACJKL
  • Heat and fire EN 407 02XXXX
  • Cold hazards EN 511 111

Product detail

Material Polychloroprene
Colour Black, blue
Interior finish Knitted thermal protection
Exterior finish Pebbled
Length (cm) 43
Size 8 9 10
Packaging 1 pair/bag
6 pairs/carton

Chemical chart

OVERALL CHEMICAL PROTECTION RATING

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of the colours :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT: Not tested
NA: "Not applicable" because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical Product CAS # Breakthrough time
(minutes)
Permeation
level
Standard Degradation
level
Rating
2,4-Di-tertiary Butylphenol 99% 96-76-4 29 1 ASTM F739 NT
NA
Acetonitrile 99% 75-05-8 66 3 EN 374-3:2003 NT
NA
Methanol 99% 67-56-1 480 6 EN 374-3:2003 NT
NA
n-Heptane 99% 142-82-5 41 2 EN 374-3:2003 NT
NA
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 40% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 96% 7664-93-9 190 4 EN 374-3:2003 NT
NA
Sulfuric acid 96% 7664-93-9 86 3 EN 374-3:2003 NT
NA

*not normalized result

More gloves

Temp-Dex 745
Thermal Protection

Temp-Dex 745

Dexterity and resistance to cuts for optimized thermal protection

TempDex 720
Thermal Protection

TempDex 720

Dexterity and resistance to cuts for optimized thermal protection

Exonit Plus 530
Thermal Protection

Exonit Plus 530

Flexible Thermal Protection with impact and cut protection