StanZoil NL-34/334

Excellent chemical resistance with enhanced rough grip

Chemical Protection

Specific advantages

  • Soft, absorbent interlock knit cotton liner adds comfort, easy on-off, high-and low-temperature protection.
  • 1.5 AQL - Quality Assurance

Specific features

Unique multi-layer construction, to avoid thin spots and provide visual two-tone indicator.

Applications

Mechanical industry

  • Maintenance in wet environments (water, oil, greases, hydrocarbons)

Chemical industry

  • Handling and transporting chemicals

Petroleum industry

  • Handling

Standards

  • Mechanical hazards EN 388 3121
  • ACJKL
  • Micro-organisms EN 374
  • Heat and fire EN 407 X2XXXX

Product detail

Material Polychloroprene
Colour Black, blue
Interior finish Textile support
Exterior finish Non-slip grip
Length (cm) 31
Size 6 7 8 9
Packaging 12 pairs/box
72 pairs/carton

Chemical chart

OVERALL CHEMICAL PROTECTION RATING

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of the colours :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT: Not tested
NA: "Not applicable" because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical Product CAS # Breakthrough time
(minutes)
Permeation
level
Standard Degradation
level
Rating
1,1,1-Trichloroethane 99% 71-55-6 20 1 ASTM F739 1
-
1,1,2-Trichloroethane 97% 79-00-5 7 0 ASTM F739 2
-
1,2 - dichloroethane 99% 107-06-2 6 0 ASTM F739 NT
NA
2-Bromo-ethyl acetate 97% 927-68-4 52 2 ASTM F739 2
=
2-Hydroxyethyl Methacrylate 97% 868-77-9 480 6 ASTM F739 NT
NA
2-Propanol (Isopropanol) 99% 67-63-0 450 5 ASTM F739 4
++
2,6-Dimethyl-4-heptanone (Diisobutyl Ketone) 80% 108-83-8 56 2 ASTM F739 3
+
Acetaldehyde 99% 75-07-0 5 0 ASTM F739 NT
NA
Acetic acid 10% 64-19-7 NT NT 4
NA
Acetic acid 50% 64-19-7 NT NT 4
NA
Acetic acid 99% 64-19-7 210 4 ASTM F739 4
++
Acetone 99% 67-64-1 8 0 ASTM F739 3
=
Acetonitrile 99% 75-05-8 53 2 ASTM F739 4
+
Acrylate 2-Hydroxyethyl 96% 818-61-1 480 6 ASTM F739 NT
NA
Acrylic acid 95% 79-10-7 480 6 ASTM F739 4
++
Acrylic acid 99% 79-10-7 480 6 ASTM F739 4
++
Acrylonitrile 99% 107-13-1 19 1 ASTM F739 NT
NA
Ammonium hydroxide solution 29% 1336-21-6 265 5 ASTM F739 4
++
Amyl Acetate 99% 628-63-7 25 1 ASTM F739 2
=
Amyl Alcohol 99% 71-41-0 480 6 ASTM F739 4
++
Aniline 99% 62-53-3 142 4 ASTM F739 4
++
Benzene 99% 71-43-2 3 0 ASTM F739 NT
NA
Benzotrichloride 100% 98-07-7 63 3 ASTM F739 NT
NA
Benzoyl Chloride 100% 98-88-4 28 1 ASTM F739 NT
NA
Benzyl Chloride 99% 100-44-7 17 1 ASTM F739 2
=
Butyl Acetate 99% 123-86-4 17 1 ASTM F739 1
-
Butyl Acrylate 99% 141-32-2 15 1 ASTM F739 1
-
Calcium Hydroxide 0,18% 1305-62-0 480 6 ASTM F739 4
++
Carbon disulfide 99% 75-15-0 1 0 ASTM F739 3
=
Carbon Tetrachloride 99% 56-23-5 24 1 ASTM F739 3
=
Chlorine 100% 7782-50-5 480 6 ASTM F739 NT
NA
Chlorine 99% 7782-50-5 44 2 ASTM F739 NT
NA
Chloroform 99% 67-66-3 2 0 ASTM F739 NT
NA
Chromic Acid 50% 7738-94-5 348 5 ASTM F739 4
++
Cumene 98% 98-82-8 22 1 ASTM F739 1
-
Cyclohexane 99% 110-82-7 35 2 ASTM F739 3
+
Cyclohexanol 99% 108-93-0 480 6 ASTM F739 4
++
Cyclooctadiene 99% 111-78-4 23 1 ASTM F739 NT
NA
Dibutyl Phthalate 99% 84-74-2 480 6 ASTM F739 4
++
Dichloromethane (Methylene Chloride) 99% 75-09-2 4 0 ASTM F739 3
=
Diethylamine 98% 109-89-7 4 0 ASTM F739 NT
NA
Dimethyl Sulfide 99% 75-18-3 2 0 ASTM F739 1
-
Dimethylformamide 99% 68-12-2 30 1 ASTM F739 3
=
Dimethylsulfoxide 99% 67-68-5 456 5 ASTM F739 4
++
Diphenyl Phospite NA 4712-55-4 480 6 ASTM F739 NT
NA
Ethanol 95% 64-17-5 363 5 ASTM F739 4
++
Ether (Diethyl Ether) 99% 60-29-7 4 0 ASTM F739 3
=
Ethyl acetate 99% 141-78-6 8 0 ASTM F739 NT
NA
Ethyl acrylate 99% 140-88-5 18 1 ASTM F739 1
-
Ethyl benzene 99% 100-41-4 1 0 ASTM F739 NT
NA
Ethyl Chloroformate 97% 541-41-3 4 0 ASTM F739 2
-
Ethylene glycol 99% 107-21-1 480 6 ASTM F739 4
++
Formaldehyde 37% 50-00-0 480 6 ASTM F739 4
++
Formic Acid 96% 64-18-6 NT NT 4
NA
Fuel oils mixture 68476-34-6 480 6 ASTM F739 NT
NA
Glutaraldehyde 50% 111-30-8 NT NT 4
NA
Hexachlorocyclopentadiene 100% 77-47-4 30 1 ASTM F739 NT
NA
Hydrazine 35% 302-01-2 480 6 ASTM F739 4
++
Hydrazine 70% 302-01-2 NT NT 4
NA
Hydrochloric acid 10% 7647-01-0 480 6 ASTM F739 4
++
Hydrochloric acid 35% 7647-01-0 NT NT 4
NA
Hydrochloric acid 37% 7647-01-0 480 6 ASTM F739 4
++
Hydrofluoric Acid 10% 7664-39-3 480 6 ASTM F739 4
++
Hydrofluoric Acid 49% 7664-39-3 480 6 ASTM F739 4
++
Hydrogen fluoride Anhydrous 99% Gas 7664-39-3 35 2 ASTM F739 NT
NA
Hydrogen peroxide 30% 7722-84-1 NT NT 4
NA
Hypophosphorous Acid 50% 6303-21-5 480 6 ASTM F739 NT
NA
Isobutyl alcohol 99% 78-83-1 480 6 ASTM F739 4
++
m,o,p-Chlorotoluene mixture 25168-05-2 15 1 ASTM F739 NT
NA
Maleic Acid 9,1% 110-16-7 480 6 ASTM F739 4
++
meta-Xylene 99% 108-38-3 NT NT 2
NA
Methanol 85% 67-56-1 NT NT 4
NA
Methanol 99% 67-56-1 195 4 ASTM F739 4
++
Methyl Ethyl Ketone (2-Butanone) 99% 78-93-3 9 0 ASTM F739 1
-
Methyl methacrylate 95% 80-62-6 15 1 EN 374-3:2003 1
-
Methylamine 40% 74-89-5 391 5 ASTM F739 4
++
Methylisobutylketone 99% 108-10-1 19 1 ASTM F739 2
=
Mineral Spirits 100% 64475-85-0 127 4 ASTM F739 NT
NA
n-Butanol 99% 71-36-3 480 6 ASTM F739 4
++
n-Heptane 99% 142-82-5 50 2 ASTM F739 4
+
n-hexane 95% 110-54-3 36 2 ASTM F739 4
+
N-N dimethyl acetamide 99% 127-19-5 45 2 ASTM F739 2
=
n-Propanol 99% 71-23-8 480 6 ASTM F739 4
++
N,N-Diisopropylethylamine 99% 7087-68-5 301 5 ASTM F739 4
++
Naphtha (Stoddart Solvent) mixture 8052-41-3 241 5 ASTM F739 3
++
Naphtha Heavy mixture 68551-17-7 NT NT 4
NA
Naphtha VM&P mixture 8032-32-4 23 1 ASTM F739 4
+
Nitric acid 10% 7697-37-2 NT NT 4
NA
Nitric acid 20% 7697-37-2 NT NT 4
NA
Nitric acid 40% 7697-37-2 NT NT 4
NA
Nitric acid 50% 7697-37-2 NT NT 4
NA
Nitric acid 68% 7697-37-2 NT NT 4
NA
Nitric acid 70% 7697-37-2 NT NT 4
NA
Nitric acid 90% 7697-37-2 3 0 ASTM F739 NT
NA
Nitrobenzene 99% 98-95-3 52 2 ASTM F739 NT
NA
Nonylphenol 99% 25154-52-3 480 6 ASTM F739 NT
NA
Oleic Acid 90% 112-80-1 NT NT 3
NA
Oleum (free SO3) 30% 8014-95-7 10 0 ASTM F739 NT
NA
Parachlorobenzotrichloride 99% 5216-25-1 70 3 ASTM F739 NT
NA
Pentane 99% 109-66-0 NT NT 4
NA
Phenol 85% 108-95-2 480 6 ASTM F739 4
++
Phosphoric acid 75% 7664-38-2 480 6 ASTM F739 4
++
Phosphoric acid 85% 7664-38-2 480 6 ASTM F739 4
++
Potassium Hydroxide 50% 1310-58-3 480 6 ASTM F739 4
++
Potassium Iodide 59% 7681-11-0 480 6 ASTM F739 4
++
Propylene Oxide 99% 75-56-9 1 0 ASTM F739 NT
NA
Pyridine 99% 110-86-1 10 0 ASTM F739 1
-
Sodium Carbonate 21,6% 497-19-8 480 6 ASTM F739 4
++
Sodium hydroxide 20% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 40% 1310-73-2 480 6 ASTM F739 4
++
Sodium hydroxide 50% 1310-73-2 480 6 ASTM F739 4
++
Sodium Thiosulfate 41,2% 7772-98-7 480 6 ASTM F739 4
++
Styrene 99% 100-42-5 2 0 ASTM F739 NT
NA
Sulfur dichloride 100% 10545-99-0 30 1 ASTM F739 NT
NA
Sulfur monochloride 100% 10025-67-9 480 6 ASTM F739 NT
NA
Sulfuric acid 10% 7664-93-9 480 6 EN 374-3:2003 4
++
Sulfuric acid 40% 7664-93-9 480 6 EN 374-3:2003 4
++
Sulfuric acid 96% 7664-93-9 88 3 ASTM F739 2
+
t-Butyl Methyl Ether 98% 1634-04-4 6 0 ASTM F739 NT
NA
tert-Butyl Hydroperoxide 70% 75-91-2 454 5 ASTM F739 NT
NA
Tetrachloroethylene (Perchloroethylene) 99% 127-18-4 7 0 ASTM F739 1
-
Tetrahydrofurane 99% 109-99-9 3 0 ASTM F739 3
=
Toluene 99% 108-88-3 6 0 ASTM F739 1
-
Trichloroethylene 99% 79-01-6 1 0 ASTM F739 NT
NA
Triethylamine 99% 121-44-8 35 2 ASTM F739 2
=
Trifluoroacetic Acid 99% 76-05-1 480 6 ASTM F739 4
++
Unleaded gasoline mixture 8006-61-9 8 0 ASTM F739 1
-
Vinyl acetate 99% 108-05-4 14 1 ASTM F739 2
=
Xylene 99% 1330-20-7 17 1 ASTM F739 1
-

*not normalized result

More gloves

ChemPly N740
Chemical Protection

ChemPly N740

Ultra-high performance chemical protection

UltraNeo 401
Chemical Protection

UltraNeo 401

Tactile sensitivity for light chemical protection

Two-Tone NS53
Chemical Protection

Two-Tone NS53

Excellent choice for light chemical protection