Alto 285

Good mechanical performance for long-lasting chemical protection

Chemical Protection

Specific advantages

  • Long cuff provides better protection of the forearm
  • Longer service life and good impact protection, due to the thickness of the material
  • Silicone free to prevent traces, defects on metal sheet and glass prior to painting

Specific features

Reinforced grip for better handling

Applications

Mechanical industry

  • Maintenance in wet environments (water, oil, greases, hydrocarbons)

Other industries

  • Maintenance in wet environments

Standards

  • Mechanical hazards EN 388 2131X
  • Type A Specific Chemical Protection EN 374 ABKMPT
  • Micro-organisms EN 374

Product detail

Material Natural latex
Colour Yellow, beige
Interior finish Chlorinated
Exterior finish Reinforced grip
Length (cm) 60
Thickness (mm) 1.0
Size 8 9 10
Packaging 1 pair/bag
30 pairs/carton

Chemical chart

OVERALL CHEMICAL PROTECTION RATING

Protection rating is determined by taking into account the effects of both permeation and degradation in an attempt to provide users with an overall protection guideline when using our glove products against specific chemicals.

Meaning of the colours :

Used for high chemical exposure or chemical immersion, limited to breakthrough time based on a working day.
Used for repeated chemical contact, limited to total chemical exposure i.e. : accumulative breakthrough time based on a working day.
Splash protection only, on chemical exposure the gloves should be discarded and new gloves worn as soon as possible.
Not recommended, these gloves are deemed unsuitable for work with this chemical.
NT: Not tested
NA: "Not applicable" because not fully tested (only degradation OR permeation results)

The chemical test data and overall chemical protection rating should not be used as the absolute basis for glove selection. Actual in-use conditions may vary glove performance from the controlled conditions of laboratory tests. Factors other than chemical contact time

Chemical Product CAS # Breakthrough time
(minutes)
Permeation
level
Standard Degradation
level
Rating
Acetic acid 10% 64-19-7 480 6 EN 374-3:2003 NT
NA
Acetic acid 99% 64-19-7 138 4 EN 374-3:2003 NT
NA
Acetone 100% 67-64-1 84 3 EN 16523-1:2015 NT
NA
Acetone 99% 67-64-1 NT NT 2
NA
Dimethylformamide 99% 68-12-2 147 4 EN 374-3:2003 NT
NA
Ethanol 95% 64-17-5 160 4 EN 374-3:2003 NT
NA
Formaldehyde 37% 50-00-0 480 6 EN 16523-1:2015 4
++
Hydrochloric acid 10% 7647-01-0 480 6 EN 374-3:2003 NT
NA
Hydrochloric acid 35% 7647-01-0 480 6 EN 374-3:2003 NT
NA
Hydrogen peroxide 30% 7722-84-1 480 6 EN 16523-1:2015 3
++
Methanol 99% 67-56-1 331 5 EN 16523-1:2015 4
++
Methyl Ethyl Ketone (2-Butanone) 99% 78-93-3 25 1 EN 374-3:2003 NT
NA
N-methyl-2-Pyrrolidone 99% 872-50-4 210 4 EN 374-3:2003 NT
NA
Nitric acid 65% 7697-37-2 480 6 EN 16523-1:2015 4
++
Phosphoric acid 75% 7664-38-2 480 6 EN 374-3:2003 NT
NA
Phosphoric acid 85% 7664-38-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 20% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sodium hydroxide 40% 1310-73-2 480 6 EN 16523-1:2015 4
++
Sodium hydroxide 50% 1310-73-2 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 10% 7664-93-9 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 40% 7664-93-9 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 50% 7664-93-9 480 6 EN 374-3:2003 NT
NA
Sulfuric acid 96% 7664-93-9 480 6 EN 374-3:2003 NT
NA

*not normalized result

More gloves

UltraNeo 450
Chemical Protection

UltraNeo 450

Extremely supple with freedom of movement for standard chemical protection

Ultranitril 410
Chemical Protection

Ultranitril 410

Ideal glove for operations where cut & chemical protection are required, with better degradation performance to acids and optimal grip.

UltraNeo 407
Chemical Protection

Chem-Ply N-440

Ultra-high performance chemical protection